| Пoзиция | Наименование |
| 1 | Зaдняя панель |
| 2 | Испаритель |
Чтобы заменить испаритель, сделайте следующее:
- Evacuate refrigerant as described in this manual (see "Evacuation of refrigerant" p. 195).
- Remove pos. 1.
- Remove heating elements below pos. 2.
- Remove the sensors for evaporator temperature / suction temperature / humidity.
- Dismount / cut the suction and liquid pipe for pos. 2 on a proper place.
- Remove / drill out rivets heads and remove pos. 2.
- Punch the remaining rivet pieces into the foam using a (max ø5mm) tool.
- Mount new evaporator on chassis with appropriate rivets.
- Connect the suction and liquid pipe to the new evaporator.
- Reinstall the heating elements.
- Reinstall the sensors for evaporator temperature / suction temperature / humidity.
- Reinstall pos. 1.
- Pump down the unit (see "Pump down of unit" p. 196).
- Charge unit as described in this manual (see "Charging of refrigerant" p. 197).
Предыдущая Оглавление Следующая
ООО «Транстек» - Рефконтейнеры.рф ®
